Epson 440 - Manual (Page 118)

EPSON Stylus Color 440/640/740 Revision A
Chapter 4 Disassembly and Assembly 118
[For Stylus Color 440, 640]
1. Remove the housing. (Refer to Section 4.2.1.)
2. Remove the absorber tray assembly ;A. (Refer to Section 4.2.4.2.)
3. Remove the 2 screws securing the PF motor assembly. to the
frame.
Figure 4-14. Removing the PF Motor Assembly
(Stylus Color 440, 640)
C H E C K
P O I N T
When disassembling the PF motor assembly, pull the
motor assembly out of the frame a little bit and
remove it, sliding it into a larger hole in the frame.
(Refer to Figure 4-14.)
Be careful of the direction of the wires from the PF
motor assembly.
Do not damage or mar the grooves in the gears
during the disassembly and assembly.
P F M o t o r A s s e m b l y