Epson 440 User Manual
Page 173
EPSON Stylus Color 440/640/740
Revision A
Chapter 7
Appendix
173
Notes:
**: Change model name of IEEE1284 device ID
*1.Adjusted at factory.
*2.Initialized after panel initialization is performed.
*3.01H is a factory setting for pacific market. (This note for the address 35H is only
applicable for the Stylus Color 440.)
*4.This function uses in the case that Raster graphics of 180 x 180 dpi (It is “economy”
binding in a driver.) is printed and specifies the size of a dot.
An ink life can be improved, by making this binding a normal x 1 dot, although an
ordinariness prints it with normal x2 dot. Yet, the printing result becomes pale even
since before. This function is implemented in the firmware subsequent to version
Kaxxxx. Refer to the tables below.
Table A-26.
Stylus Color 440/640
EEPROM Address Map (Continued)
Address
Explanation
Setting
QPIT
Settings
Factory
Settings
66H
Ink counter A
00H
00H
∗
2
67H
00H
00H
∗
2
68H
power off time
00H
00H
∗
2
69H
00H
00H
∗
2
6AH
CL time
00H
00H
∗
2
6BH
00H
00H
∗
2
6CH
accumulated
printing time
0: 0 minute
1: 15 minutes
2: 30 minutes
3: 60 minutes
4: 90 minutes
5: 120 minutes
00H
00H
6DH
00H
00H
6EH
Stylus Color 440
Dot size for
Economy mode
0: Normal x2 dot
1: Normal x1 dot
00H
00H
(*4)
Stylus Color 640
Reserved
00H
-
6FH
Reserved
00H
-
70H
Password 7
5AH
-
71H
0FH
-
72H to
79H,
7AH to
7FH
customized model
name
string of counter
strings of model field for
Device ID
00H
00H
Table A-27. Economy Mode Specifications
Normal x2 dot
Normal x1 dot
Ink life
the same as before
improved
color
the same as before
becomes pale
Table A-28. EEPROM Value and Dot Size
Value of EEPROM (6EH)
Dot Size
00H
Normal x2 dot
01H
Normal x1 dot