Epson 440 - Manual (Page 112)

EPSON Stylus Color 440/640/740 Revision A
Chapter 4 Disassembly and Assembly 112
4.2.4.2 Removing the Absorber Tray Assembly ;A
1. Remove the housing. (Refer to Section 4.2.1.)
2. Remove the operation panel. (Refer to Section 4.2.3.)
3. Remove one screw (No.4) securing “Absorber tray assembly”
located on the right side of the printer mechanism.
4. On the right side of the printer mechanism, release the hook
securing the “Absorber tray assembly ;A” to the frame and remove
it, pulling it downward.
Figure 4-8. Removing the Absorber Tray Assembly ;A
C A U T I O N When installing the absorber tray assembly ;A, make
sure to fix it with the spacer tray in the left side of the
printer mechanism.
S p a c e r T r a y
( N o . 4 )
A b s o r b e r T r a y A s s e m b l y ; A