Emerson Process Management MICRO MOTION 2400S - Manual (Page 169)

Configuration and Use Manual 161
Device Profile
D
e
vice Pr
ofile
In
de
x
Displa
y Codes
Men
u
s
5 Display
variable 2 USINT Set NV Displays the variable
associated with the code
on the local display See Table C-15 for
codes. All codes are
valid.
6 Display
variable 3
7 Display
variable 4
8 Display
variable 5
9 Display
variable 6
10 Display
variable 7
11 Display
variable 8
12 Display
variable 9
13 Display
variable 10
14 Display
variable 11
15 Display
variable 12
16 Display
variable 13
17 Display
variable 14
18 Display
variable 15
19 Enable
start/stop totals BOOL Set NV Enable or disable the
ability to start and stop
totals from the local
display • 0 = Disabled
• 1 = Enabled
20 Enable reset
totals BOOL Set NV Enable or disable the
ability to reset totals from
the local display • 0 = Disabled
• 1 = Enabled
21 Enable auto
scroll BOOL Set NV Enable or disable the auto
scroll feature. The scroll
rate is set using
Attribute 1. • 0 = Disabled
• 1 = Enabled
22 Enable offline
menu BOOL Set NV Enable or disable the
offline menu • 0 = Disabled
• 1 = Enabled
23 Enable alarm
menu BOOL Set NV Enable or disable the
alarm menu • 0 = Disabled
• 1 = Enabled
24 Enable ACK All
alarms BOOL Set NV Enable or disable the
ability to acknowledge all
the alarms at once • 0 = Disabled
• 1 = Enabled
25 Enable IrDA
write protect BOOL Set NV Enable or disable the
write-protect feature on
the IrDA port • 0 = Disabled (reading
and writing allowed)
• 1 = Enabled (read
only)
Table C-9 Local Display Object (0x68) – Instance 1 continued
Attrib
ID
Name Data type Service Mem Description Comments