Epson All-In-One Stylus Photo RX600 - Manual (Page 83)

Printing From a Memory Card 83
Selecting One Photo
You can select a photo and print one or more copies of it on a
page using a variety of layouts.
1. Press the Memory Card button.
2. Use the u and d buttons to highlight Custom Print .
Note:
For Basic Print mode, see your How To Copy and Print book.
3. Use the l and r buttons to choose Select Print , then press the OK button.
4. Use the l and r buttons to navigate to the photo you want to print, then use
the u and d buttons to choose the number of copies you want to print.
5. Press the OK button.
6. Continue with “Printing Your Selected Photos” on page 85 to finish laying
out your photos and setting up your print job.
Selecting a Set of Photos
You can select two or more photos and print them as a group
using a variety of layouts. If you’ve selected more photos than can
fit on a page, the printer automatically prints additional pages as
needed using the same layout.
1. Press the Memory Card button.
2. Use the u and d buttons to highlight Custom Print .
3. Use the l and r buttons to choose Select Print , then press the OK button.
4. Use the l and r buttons to navigate to the photo you want to print, then
use the u and d buttons to choose the number of copies for that photo.
5. Repeat step 4 for each photo you want to print, then press the OK button.
6. Continue with “Printing Your Selected Photos” on page 85 to finish laying
out your photos and setting up your print job.
Note:
If you selected the wrong photo, you can deselect it from the list of selected
photos by changing its number of copies to zero as described in step 4.
SP RX600 Users Guide.book Page 83 Thursday, January 29, 2004 1:08 PM