Lcd problems, Uninstalling your software – Epson All-In-One Stylus Photo RX600 User Manual
Page 145
Uninstalling Your Software
145
A dotted line appears in the image.
■
If this happens on both your screen and printout, clean the scanner glass with
a soft, dry, lint-free cloth (paper towels are not recommended). If the glass is
still not clean, use a small amount of glass cleaner on a soft cloth. Make sure
you wipe off any remaining cleaner. Don’t spray glass cleaner directly on the
glass.
■
If the line is just on your printout, you may need to clean your print head, see
page 121.
LCD Problems
You can’t read the menus or view photos on the LCD.
■
You may need to adjust the LCD contrast setting: Press the
Setup
button to
set the RX600 to Setup mode. Press the d button to select
LCD Contrast
Adjustment
, then press the
OK
button. Use the l and r buttons to adjust
the contrast, then press the
OK
button.
■
The LCD screen may be in sleep mode to protect the screen. If you see a
message floating on the screen, press any button on the RX600 to wake the
screen.
Uninstalling Your Software
You may need to uninstall and then reinstall your printer driver and utilities if, for
example, you upgrade your operating system. You don’t need to uninstall
PhotoImpression or your on-screen Reference Guide. Follow the instructions in
these sections:
■
■
■
SP RX600 Users Guide.book Page 145 Thursday, January 29, 2004 1:08 PM