Epson All-In-One Stylus Photo RX600 - Manual (Page 119)

Using a Bluetooth Device 119
Choosing Bluetooth Settings
If necessary, use the Setup menu to choose settings for Bluetooth wireless
communication. You may need to enter a passkey for your printer, or turn on
encryption, depending on the settings for the Bluetooth-enabled device from
which you want to print.
1. Press the Setup button on your Stylus Photo RX600.
2. Use the u and d buttons to choose settings and use the l and r buttons to
adjust them. Choose settings in the Bluetooth option menus listed below.
Menu Item Settings Description
BT Device Name
Setting Epson Stylus Photo
RX600- (number)
(Default = 0) If multiple Bluetooth-enabled
printers are in the same
communication range, you can
distinguish them by assigning
each a unique number (from 0
through 9). To make the
Device Name Setting take
effect, turn the printer off and
then back on.
BT
Communication
Mode Discoverable This mode allows Bluetooth-
enabled devices to freely
discover the printer and send
print jobs.
Not discoverable This mode prevents unknown
devices from discovering the
printer. To print in this mode,
first search for the printer
once in discoverable mode.
After your device has
discovered the printer once, it
will subsequently be able to
communicate with and print
from it in this mode.
Pairing This mode requires that a four-
digit Passkey be entered into a
device before it can
communicate with and print
from the printer.
SP RX600 Users Guide.book Page 119 Thursday, January 29, 2004 1:08 PM