Epson All-In-One Stylus Photo RX600 - Manual (Page 18)

18 Loading Paper
4. Press the sides of the left edge guide together and slide it against the envelopes
(but not too tightly).
Note:
For best results, press each envelope flat before loading, or load one envelope at a
time. Avoid envelopes that are too thin; they may curl during printing.
Select the following settings when printing on envelopes:
■ Plain paper as the Type (Windows ® ) or Media Type (Macintosh ® ) setting
■ The correct envelope size as the Size (Windows) or Paper Size (Macintosh)
setting
■ Landscape as the Orientation setting
For instructions on selecting these settings, see:
■ “Printing in Windows” on page 36
■ “Printing on a Macintosh” on page 43
Load envelopes
short edge first,
printable side up,
and flap edge left
SP RX600 Users Guide.book Page 18 Thursday, January 29, 2004 1:08 PM