SMA SC 500CP-10-JP Installation Manual - Manual (Page 67)

SMA Solar Technology AG 13 Setting up a System Network
Installation Manual SCCP-JP-IA-A4-en-12 67
13.2 Position of the Communication Terminals
13.2.1 Connection Area
Figure 28: Position of the communication terminals
13.2.2 Setting up a System Network with Optical Fibers
Depending on the order option, you can integrate the Sunny Central into the system network with optical fibers. In this
case, the Sunny Central is equipped with an integrated splice box. The splice box features an SC-P plug to which the
optical fibers can be connected directly.
There are two ways of connecting the optical fibers to the SC-P plug:
• Connection of optical fibers via subscriber connectors
• Connection of optical fibers via optical fiber pigtail
Connection of Optical Fibers via Subscriber Connectors
Additionally required mounting material (not included in the scope of delivery):
☐ Two subscriber connectors
Requirement:
☐ The Sunny Central must be disconnected (see Section 14 "Disconnecting the Sunny Central", page 69).
Position Quantity Designation
A 1 Splice box*
* optional
B 2 Network terminal
/05*$&
Damage to optical fibers due to too tight bend radii
Overly bending or kinking will damage the optical fiber.
• Observe the minimum permissible bend radii of the optical fibers.