SMA SC 500CP-10-JP Installation Manual - Manual (Page 40)

8 Installing the Sunny Central SMA Solar Technology AG
40 SCCP-JP-IA-A4-en-12 Installation Manual
6. Screw all washers and hexagon nuts to the remaining stud bolts of
the rear panel.
7. Align the lid and tighten all screws and nuts (torque: 8 Nm).
Mounting the Rain Protection
Required mounting material:
☐ 2 cylinder head screws
☐ 2 contact washers
☐ 6 pan head flange screws
Procedure:
1. Align the rain protection at the silencing baffle.
2. Screw two cylinder head screws with contact washers into the
right-hand and left-hand lower thread of the lid and tighten
(torque: 8 Nm).
3. Screw six pan head flange screws into the thread and tighten
(torque: 8 Nm).