HEIDENHAIN TNC 426B (280 472) Touch Probe Cycles - Manual (Page 3)

HEIDENHAIN TNC 426, TNC 430 I
TNC Model, Software and Features
This manual describes functions and features provided by TNCs as of
the following NC software numbers.
The suffixes E and F indicate the export versions of the TNC The
export versions of the TNC have the following limitations:
n Linear movement is possible in no more than 4 axes simultaneously.
The machine tool builder adapts the useable features of the TNC to his
machine by setting machine parameters. Some of the functions
described in this manual may not be among the features provided by
your machine tool.
TNC functions that may not be available on your machine include:
n Digitizing option
n Tool Measurement with the TT
Please contact your machine tool builder to become familiar with the
features of your machine.
Many machine manufacturers, as well as HEIDENHAIN, offer
programming courses for the TNCs. We recommend these courses as
an effective way of improving your programming skill and sharing
information and ideas with other TNC users.
Location of use
The TNC complies with the limits for a Class A device in accordance
with the specifications in EN 55022, and is intended for use primarily
in industrially-zoned areas.
TNC model NC software number
TNC 426, TNC 430 280 472-10
TNC 426, TNC 430 280 474-13
TNC 426, TNC 430 280 476-04
User’s Manual:
All TNC functions that have no connection with touch
probes are described in the User's Manual of the
respective control. Please contact HEIDENHAIN if you
need a copy of this User’s Manual.