Grass Valley MRC v.1.2 - Manual (Page 72)

62
Configuring Routers
Redundant Crosspoint Page
The redundant card’s active LED turns on, the button labeled 3 turns bright, and the ‘Standby’
button turns dim.
The same holds true for any of the other crosspoint cards.
You can place the redundant card in standby mode by pressing its ‘Standby’ button.
You can do the same kind of switching — possibly remotely — using the redundant card image
in the ‘Redundant Crosspoint’ page. These two figures show different states of the redundant
crosspoint buttons:
Redundant card standby;
all normal cards active.
Redundant card active and
substituting for card 3
Gray buttons are those that
are disabled while a cross-
point is deactivated.