Grass Valley MRC v.1.2 - Manual (Page 117)

107
Miranda Router Configurator
User’s Guide
Example
If a salvo has these crosspoints . . .
and the clipboard (and the ‘Paste Crosspoints’ dialog) show these crosspoints . . .
then the resulting salvo acquires two new outputs.
The new entries are highlighted in blue.
The clipboard contained an entry for output 8. Because the salvo already had output 8, it is not a
new entry.
You can copy from the ‘Current’, ‘History’, or ‘Salvo’ tabs, but you can paste only into the ‘Current’
or ‘Salvo’ tabs. The History tab is read-only.
It is not possible to add entries to the ‘Current’ view. The current view displays a router’s cross-
point matrix and that cannot be changed. An attempt to add outputs to the crosspoint will be
ignored.
It is certainly acceptable to add outputs to a salvo.