Grass Valley MRC v.1.2 - Manual (Page 58)

48
Configuring Routers
Input Attributes Page
Input Attributes Page
The ‘Input Attributes’ page applies only to NV8500 hybrid routers.
The page allows you to specify, for any video input, whether the embedder of any output to
which the input is routed is to be forced ON.
Normally, the audio embedder of an output is enabled or disabled automatically according to
internal switching rules. See
Switching “Rules” on page 149.
The table in this page gives you a choice for each input.
• Force embedder ON.
• Use switching rules.
Caution: if your router control system uses DHP to control the router, make sure that the setting
is ‘Use Switching Rules’ for all inputs.
This is a view of the page for an expanded NV8576-Plus:
The page has two regions. At the bottom is a ‘Network Frame Summary’ that contains tabbed
tables. In the ‘Hybrid Router’ table, you can select the control card of a router to configure.