Grass Valley MRC v.1.2 User Manual
Page 29
19
Miranda Router Configurator
User’s Guide
The following is a list of all tabs that display in the Network Frame Summary:
•
Control Cards
—
lists all control cards in the MRC system. This tab is used to select a control
card to configure.
•
Hybrid Routers
—
used to select a control card in a hybrid router frame. When this tab
appears, functions are restricted to hybrid router frames.
•
All Control Cards
—
lists all control cards in the MRC system. This tab is used for information
only; control cards cannot be selected in this tab. On pages where this tab appears, control
cards have been filtered to display on either the Hybrid Routers tab or the Video Routers
tab.
•
Network Levels
—
lists all levels in the MRC system and their associated parameters. This tab
is for information only.
See
.
•
Video Routers
—
used to select a control card in a video router frame. When this tab
appears, functions are restricted to control cards installed in video router frames.
(There are no tabs for audio routers or machine control routers.)
Each row of a tabbed table represents a single control card (or a single level). The table’s
columns either allow the selection of a control card or provides details about the control card or
the level listed on that row.
The following list describes the columns that appear in the tabbed tables:
Tabbed Table
Column
Description
‘Control Cards’
or
‘Hybrid Routers’
or
‘Video Routers’
Edit / Select
Click the radio button to select the control card listed on that row.
Online
Indicates whether the control card is currently active and commu-
nicating with the router control system. When the entry says
‘Active’, the control card is the currently active card.
When the entry says ‘Standby’, the card is the inactive (on standby)
card.
The term ‘Virtual’ indicates a virtual control card. (See
Name
The name assigned to the router frame in which the control card is
installed.
Type
The router model number, such as NV8280.
IP Address
The IP address currently assigned to the control card.
Expansion
Indicates whether the control card is installed in an expanded
router.
‘Stand Alone’ indicates that the frame is not connected to another
frame.
‘Expanded - Main’ indicates that the router is an expanded router
and the frame is the main frame.
‘Expanded - Expansion’ indicates that the router is an expanded
router and the frame is an expansion frame, not the main frame.
(See