Grass Valley MRC v.1.2 - Manual (Page 144)

134
Network Setup
Ethernet Settings Page
See Copy Settings Page on page 78.
• A pre-configured virtual control card is created by importing control card settings from a
saved configuration file (a .zip file).
See How to Create a Virtual Control Card by Importing a Configuration File on page 135.
MRC treats virtual control cards the same way it treats physical control cards.
MRC denotes virtual control cards by a blue circle in many of its tables.
Virtual control cards have no IP address. (The IP address field appears as 0.0.0.0 in the tables.)
How to Create a Blank Virtual Control Card
1 Go to the ‘Ethernet Settings’ page. Click Add Device . The ‘Add Device’ dialog appears.
2 Choose the Create Virtual Control Card radio button and then select a device type from the
Device ID drop-down menu. Devices are listed by model number, such as EC9535, NV5100,
or NV8576 hybrid. The virtual control card will contain a configuration for that device type.
3 Click OK . The new virtual control card appears in the ‘Ethernet Settings’ page, denoted by a
blue circle and the word ‘Virtual’.