Grass Valley MRC v.1.2 - Manual (Page 22)

12
Using MRC
Overview of MRC
card and one for the secondary (redundant) control card in the router frame. For details about
the serial ports, see the router’s documentation. The control card allows only one third-party
protocol to be loaded at any one time.
MRC fully supports these NV8500 series hybrid routers (i.e., those that use an EM0833 control
card):
NV8144 144 × 144
NV8140 144 × 288
NV8280 288 × 576
NV8576 576 × 1152
NV8576-Plus, single frame 576 × 576
NV8576-Plus, expanded (two frames) 1152 × 1152
For information about the NV8500 routers, see the NV8500 Series Routers User’s Guide.
MRC has limited support for all other NVISION series routers and some other devices that have
NVISION series control cards, such as the EC9535.
An NV8500 series standard router (one that uses an EM0666 control card), and all other routers
are configured primarily by UniConfig or UniDiag configuration software. Contact Miranda for
more information.