Grass Valley MRC v.1.2 - Manual (Page 112)

102
Router Tools
Crosspoints Page
Otherwise, the take sequence is manual. Click the take button in the ‘Perform a Take’ section
every time you want to step the take sequence.
8 If you initiated an automatic take sequence, click ‘Stop’ when you want to terminate the
sequence. Otherwise the take sequence will run indefinitely (and the inputs and outputs will
wrap around to the beginning or the end of the router’s ranges if you let it run long enough).
9 After you start one automatic sequence, you can start additional sequences, automatic or
manual.
History Tab
The ‘Crosspoints’ page lets you set a crosspoint matrix to any of its previous states. Each time a
take, a range take, or a diagonal take is performed, a corresponding record is added to the
‘History’ tab.
The ‘History’ tab lists up to 50 activities (the 50 most recent) in the ‘Undo History’ section.
The ‘Undo History’ section allows you to select any state of any router — recent or old.
The ‘Undo History’ section is organized primarily by router, in the order in which you accessed
the routers. Within a router, the history is organized by level, and within a level, by activity (such
as a range take). The activities are simply numbered, the largest number being the oldest.