Grass Valley EDIUS v.5.1 - Manual (Page 748)

748 EDIUS — User Reference Guide
Appendix A — Hardware Settings
5. Click the OK button to save settings and close the settings dialog.
EDIUS Generic HDV Settings
Generic HDV Settings are accessed by selecting Settings>Hardware Set-
tings from the Preview window and then selecting Generic HDV Settings.
Note If the Hardware Settings tree is collapsed, click the “+” to expand the tree.
There are two settings dialogs for Generic HDV devices; “Canopus HQ
Codec Settings” and “Video Overlay Settings.”
Canopus HQ Codec Settings
See Canopus HQ Codec Settings on page 719 .
Video Overlay Settings
See Video Overlay Settings on page 721 .
EDIUS Generic OHCI Settings
Generic OHCI Settings are accessed by selecting Settings>Hardware Set-
tings from the Preview window and then selecting Generic OHCI Settings.
Note If the Hardware Settings tree is collapsed, click the “+” to expand the tree.
There are three settings dialogs for Generic OHCI devices; “System/
Output Settings”, “DV Device Settings” and “Video Overlay Settings.”
System/Output Settings
To define System/Output Settings for a generic OHCI device, do the fol-
lowing:
1. If necessary, click the “+” to expand the Generic OHCI Settings tree.
Select “System/Output Settings” from the Generic OHCI Settings tree. The
dialog in
Figure 886 appears.