Grass Valley EDIUS v.5.1 - Manual (Page 645)

EDIUS — User Reference Guide 645
Entering Value Adjustments
Additional Rubberband Adjustments
• Dragging the point horizontally changes the position of the point on the
Timeline at which the adjustment takes place.
• Dragging the point while pressing the [SHIFT] key adjusts the entire
rubber band from the adjustment point to the end of the clip or to the
next adjustment point. See
Figure 789 .
Figure 789. Pan Point Adjusted with SHIFT Key
• Dragging the point while pressing the [CTRL] key provides fine ver-
tical adjustments.
• Pressing the [SHIFT]+[ALT] keys and dragging the rubber band adjusts
the entire rubber band vertically.
• Pressing the [ALT] key and clicking on the rubberband where no
adjustment point exists add points and adjusts the rubber band
between these new points.
To delete a point from the rubber band, right-click on the point and select
Add/Delete from the menu.
Entering Value Adjustments
Volume and pan can also be adjusted by right clicking on a rubber band
point and selecting the adjustment method from the menu. See
Figure 790 .
1. If the audio track is not expanded, click the Expand button.
2. Click the Volume/Pan toggle button to select the desired rubber band.
3. Right-click the desired rubber band point. The menu in Figure 790
appears.