Grass Valley EDIUS v.5.1 - Manual (Page 130)

130 EDIUS — User Reference Guide
Section 2 — Application and Plug-In Settings
Track
Select from the drop-down list the track range for even snapping. The
choices are: All Tracks or Same Track.
Insert Mode
With insert mode enabled, adding a new clip moves any existing clips at
the insertion point forward in time to accommodate the new clip. The
length of the sequence is increased by the length of the inserted clip (see
Figure 115 ). Default = On.
Figure 115. Insert Mode Example
Overwrite Mode
With overwrite mode enabled, adding a new clip overwrites the existing
clip at the insertion point by the amount of overlap between the two clips.
The length of the sequence does not increase (see
Figure 116 ). Default = Off.
Figure 116. Overwrite Mode Example
Note Insert Mode and Overwrite Mode are mutually exclusive. Only one or the
other is active. Enabling one mode automatically disables the other.
Insert and Overwrite mode may also be toggled from the tool bar in the
Timeline window. See
Figure 117 .