Grass Valley EDIUS v.5.1 - Manual (Page 475)

EDIUS — User Reference Guide 475
Multi Cam Mode
Playback Around the Camera Switch Point
To confirm a camera switch point, you may play the area around the switch
point using various methods.
To playback the Timeline area around the switch point, Click the list button
[V] on the
Play the cursor area button and select the desired playback method
from the menu as shown in Figure 538 and explained below.
Figure 538. Play the Cursor Area Menu
Play Around Cut Point
Play the area around (approximately three seconds before and three
seconds after) the camera switch point which is before and nearest to the
current Timeline cursor position.
Play Around Cut Point - 1 Sec
Play the clip for 1 second before and 1 second after the cut point before and
neared to the current Timeline cursor position.
Play Around Cut Point - 2 Sec
Play the clip for 2 seconds before and 2 seconds after the cut point before
and neared to the current Timeline cursor position.
Play Around Cut Point - 3 Sec
Play the clip for 3 seconds before and 3 seconds after the cut point before
and neared to the current Timeline cursor position.
Play Around Cut Point (Show Only Selected Camera)
Displays only the video from the selected camera while playing the area
around (approximately three seconds before and three seconds after) the
camera switch point which is before and nearest to the current Timeline
cursor position.