Grass Valley EDIUS v.5.1 - Manual (Page 514)

514 EDIUS — User Reference Guide
Section 6 — Effects and Titles
Adding Effects Between Clips
Effects such as transitions and audio cross fades may be added between
clips.
Clip Margin
In Extend mode (see Extend Mode on page 308 for more information), adding
transitions or audio cross fades between clips requires that both clips have
a margin. The margin is the portion of the video clip that is outside the
range between the In and Out points.
In Fix mode (see Fix Mode on page 309 for more information), no margin is
required between clips.
Note When adding transitions and cross fades, the length of the clips and the
sequence changes depending upon the current editing mode (Extend or Fix).
No margin is present if the Out point of the first clip is set at the end of the
clip and the In point of the second clip is at the beginning of the clip.
If there is no margin between clips, the black triangles illustrated in
Figure 585 are present on the clips. The triangles indicate that the Out point
of first clip is at the end of the clip and the In point of the second clip is at
the beginning of the clip.
Figure 585. Clips with No Margin
If there is a margin between clips, the black triangles do not appear as
shown in
Figure 586 .
Figure 586. Clips with Margin