Grass Valley EDIUS v.5.1 - Manual (Page 723)

EDIUS — User Reference Guide 723
EDIUS NX/NX Express (NHX) Settings
Note When displaying interlaced images the ‘Field” refresh rate provides the best
setting for visually checking for errors such as reversed fields.
• Field (at a frame rate of 29.97 fps, the screen is refreshed 59.94 times per
second) - default
• Frame (at a frame rate of 29.97 fps, the screen is refreshed 29.97 times
per second
Note With progressive images, there is no difference between the two settings.
5. Select the Overlay Refresh setting. Unless video preview does not
display properly, this setting should be left at “None.”
Note This option is enabled only if specific devices and their software is installed
on the EDIUS computer.
• None (no refresh is performed. This setting provides the highest speed)
- default
• Lock/Unlock (relatively high speed video processing)
• Update Overlay (lowest speed video processing)
6. Click the OK button to save changes and exit the dialog.
Note EDIUS must be restarted for any changes in Video Overlay settings to take
effect.
EDIUS NX/NX Express (NHX) Settings
Depending upon the type of NX board installed in the EDIUS Computer,
the device will display as NHX-E1 or NHX-E2 in both the Hardware Set-
tings dialogs and the Windows device manager. The setting for both are the
same with the name being the only difference.
NHX-E1 or NHX-E2 Settings are accessed by selecting Settings>Hardware
Settings from the Preview window and then selecting NHX-E1 or NHX-E2
Settings.
Note If the Hardware Settings tree is collapsed, click the “+” to expand the tree.
System Settings
To define System Settings for an NHX-E1 or NHX-E2 device, do the fol-
lowing:
1. If necessary, click the “+” to expand the NHX-E/NHX-E2 Settings tree.