Grass Valley EDIUS v.5.1 - Manual (Page 516)

516 EDIUS — User Reference Guide
Section 6 — Effects and Titles
Figure 588. Transition Indicator Between Clips
4. Double-click the transition indicator (on an area other than the In/Out
points or cut points) to display the transition settings dialog. The
transition configuration dialog for the Dissolve transition effect is
illustrated in
Figure 589 . The Settings dialog differs for each transition
effect.
Note If the transition indicator is small and there is no area to double-click to open
the settings dialog, right-click the transition indicator and select “Settings”
from the menu or double-click the transition effect in the Information Palette.
Figure 589. Dissolve Transition Settings Dialog
5. Make any desired changes to the transition effect settings and click the
OK button to close the dialog.
Track Transitions
Transitions may be applied in the mixer area at the point where clips tran-
sition on a track. To add a track transition, do the following:
1. Select “Transitions” in the Effect Tree of the Effect Palette.