Grass Valley EDIUS v.5.1 - Manual (Page 31)

EDIUS — User Reference Guide 31
Entering Numeric Data
2. Enter the desired offset value.
A “+” before the value increments the timecode by the specified value.
A “-” before the value decrements the timecode by the specified value.
Note If the timecode value in a particular field is 00:05:35;20 (5 minutes, 35 sec-
onds, 20 frames), entering an offset value of +2510 will increment the time-
code value to 00:06:01;00 (assuming a 30 frame per second video standard).
Entering an offset value of -2510 will decrement the timecode to 00:05:10;10.
3. Press the [Enter] key.
Arrow Key Input
With the arrow key input method, the arrow keys (K,L,I,J) are used to
enter or change numeric values.
To enter numbers using the arrow key input method, do the following:
1. Select the desired input field.
2. Use the [K] key to increment the numeric value; use the [L] key to
decrement the numeric value; use the [I] key to move one number
segment to the left; use the [J] key to move one number segment to the
right.
3. Press the [Enter] key when input is finished.
Mouse Wheel Input
The mouse wheel input method uses the mouse wheel or buttons to input
numeric data.
To enter numbers using the mouse, follow these steps:
1. Move the mouse cursor near the input field. The mouse cursor shape
changes to indicate that mouse wheel input mode is active.
2. Click the numeric value you wish to change whether it is part of a
multi-segment number or a single-segment value.
3. Rotate the mouse wheel up or down to increment or decrement the
selected value.
4. Press the [Enter] key when input is finished.