Grass Valley EDIUS v.5.1 - Manual (Page 437)

EDIUS — User Reference Guide 437
Timeline Playback
Figure 489. Recorder Loop Button
Playback begins at the position of the Timeline cursor. The section of the
sequence between the In and Out points is then played repeatedly until
stopped.
3. Click the Stop button when you wish to stop the loop playback.
Playback Around Timeline Cursor
1. Position the Timeline cursor at the point at which you wish to begin
playback.
2. Click the Play the cursor area button (highlighted in blue in ).
Figure 490. Recorder Play the Cursor Area Button
The area approximately three (3) seconds before and three (3) seconds after
the cursor position is played repeatedly until stopped.
3. Click the Stop button when you wish to stop playback.
Playback Around Nearest Cut Point
You can also play the area around the cut point nearest to the Timeline
cursor position.
Click the list button [V] on the Play around cursor area button and select one
of the following from the menu:
• Play around Cut Point - 1 Sec
• Play around Cut Point - 2 Sec
• Play around Cut Point - 3 Sec
This operation will repeatedly plays the area around the cut point nearest
to the Timeline cursor for the specified number of seconds before and after
the cut point.
Click the Stop button when you wish to stop playback.