Grass Valley Aurora Ingest v.6.5.2 - Manual (Page 65)

5. To change the luminance value of your color, move the right arrow up and down
with the minimum value at the bottom and maximum value at the top of the scale.
6. To change the hue, move the crosshair marker left and right with the minimum
value on the most left and maximum value on the most right.
7. To change the saturation value of your color, move the crosshair marker up and
down with the minimum value at the bottom and maximum value on top.
8. Click the Add to Custom Colors button to add the color that you chose to the Custom
colors section on the color palette.
9. Select the text color that you want for Scheduler application and click OK .
10. To change the color of 7 states of events in the Scheduler, select the state from the
drop-down list:
11. Follow steps 5-9 if you want to customize your own state colors.
12. Select the color for each state from the color palette and click OK .
13. To change the color of an event border, select the border from 6 types of borders
in the dropdown list:
14. Follow steps 5-9 if you want to customize your own border colors.
15. Select the color for each border from the color palette and click OK .
16. Click Apply to implement your color changes.
17. To reset back to default colors, click the Reset button.
13 August2009 Aurora Ingest System Guide 65
Configuring Aurora Ingest