Grass Valley Aurora Ingest v.6.5.2 - Manual (Page 50)

3. Channel details can be entered as below:
Description Setting
Enter a name for the channel. This name identifies the channel in Aurora
Ingest - Server and its clients. Name
Select media server for the channel from the dropdown list. (Media
servers are configured within the Media Server tab.) Media
Server
In the drop-down list, select or enter the name of the media server
channel you are using to record, such as VTR1, VTR2, VTR3, etc. Channel
Select a router destination from the drop-down list. If you haven't
configure your router sources or not using a router in your operation, Router
Destination
the drop-down list will be empty. (Router sources are configured within
the Router tab.)
NOTE: Each K2/Summit channel should be connected to either Aurora Ingest
or Aurora Playout only. Connecting to both applications at the same time
could cause channel conflicts.
4. If channel groups had been configured prior to channel setup, you have to assign
the channel to a channel group first. The Assign Channel Groups window will be
displayed when you click the
Add button.
50 Aurora Ingest System Guide 13 August2009
Configuring Aurora Ingest