Grass Valley Aurora Ingest v.6.5.2 - Manual (Page 108)

Description Column
The user who created the clip. Owner
Any error message describing why the event was not recorded to the server. Error
Message
Crash Recording
You can crash record when you want to record an event immediately.
1. Select the channel where you want to record the event.
2. Enter the name of the clip in the Name dialog box. If the name is not populated
prior to the crash record, a default name will be set according to your setting within
Aurora Ingest Server. The name will automatically increment the reference count
if there's another name that matches it.
3. Select the router source for the recording by selecting from the Source dropdown
list.
4. Select the location for the clip to be recorded into from the Location dropdown
list. If the location is not populated prior to the crash record, the clip will be recorded
into a default folder that had been set within your Aurora Ingest Server setting.
5. If the feature to switch aspect ratio is enabled within your Aurora Ingest - Server
and the feature is supported on your media server, select the aspect ratio that you
need from the dropdown list.
6. Click the Record button .
While the clip is recording, the record button flashes and the clip is displayed
in red. A scheduled clip is displayed in blue.
The clip cues, and after a short time the clip begins recording.
7. During the recording, you can modify event details by selecting the event, then
right-click on the event and select Modify Event . The Modify Event dialog box will
be displayed and you can modify details such as the event description, the end time
of the recording or link the feed to an Aurora Playout placeholder.
You can just click in the Modify event dialog box to browse for placeholders
if you want to link the feed. The Assignment List Plug-in window will be
displayed and you can select a placeholder that you need.
108 Aurora Ingest System Guide 13 August2009
Using Aurora Ingest - Scheduler