H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 73)

60
Figure 45 Local port mirroring implementation
Configuring local port mirroring
Recommended configuration procedure
Task Remarks
1. Create a local mirroring group
Required.
For more information, see "
Creating a mirroring group ."
You must select the mirroring group type local from the Type list.
2. Configure the mirroring ports
Required.
For more information, see "
Configuring ports for a mirroring group ."
During configuration, you need to select the port type Mirror Port.
You can configure multiple mirroring ports for a mirroring group.
3. Configure the monitor port
Required.
For more information, see "
Configuring ports for a mirroring group ."
During configuration, you need to select the port type Monitor Port.
You can configure one only monitor port for a mirroring group.
Creating a mirroring group
1. Select Device > Port Mirroring from the navigation tree.
2. Click Create to enter the page for creating a mirroring group, as shown in Figure 46 .
Host
Eth1/1
Data monitoring
device
Eth1/1
Mirroring process
in the device
Source port
Monitor port
Eth1/2
Eth1/2
Original packets
Device
Mirrored packets