H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 367)

354
Figure 348 RADIUS parameter configuration
3. Configure RADIUS parameters as described in Table 99 .
4. Click Apply.
Table 99 Configuration items
Item Description
Server Type
Specify the type of the RADIUS server supported by the device, including:
• extended: Specifies an extended RADIUS server (usually a CAMS or
iMC server). That is, the RADIUS client and RADIUS server
communicate using the proprietary RADIUS protocol and packet
format.
• standard: Specifies a standard RADIUS server. That is, the RADIUS
client and RADIUS server communicate using the standard RADIUS
protocol and packet format defined in RFC 2138/2139 or later.
Authentication Server Shared Key
Specify and confirm the shared key for the authentication server. These two
parameters must have the same values.
Confirm Authentication Shared
Key
Accounting Server Shared Key
Specify and confirm the shared key for the accounting server. These two
parameters must have the same values.
Confirm Accounting Shared Key