H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 121)

108
Item Description
Privacy Password Set the privacy password when the security level is Auth/Priv.
The confirm privacy password must be the same with the privacy password.
Confirm Privacy Password
ACL
Associate a basic ACL with the user to restrict the source IP address of SNMP
packets, that is, you can configure to allow or prohibit SNMP packets with a
specific source IP address, so as to allow or prohibit the specified NMS to
access the agent by using this user name.
Configuring SNMP trap function
1. Select Device > SNMP from the navigation tree.
2. Click the Trap tab.
The trap configuration page appears.
Figure 91 Traps configuration
3. Select the box of Enable SNMP Trap.
4. Click Apply.
5. Click Add.
The page for adding a target host of SNMP traps appears.