H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 120)

107
Figure 90 Create an SNMP user
4. Configure SNMP user settings as described in Table 37 .
5. Click Apply.
Table 37 Configuration items
Item Description
User Name Set the SNMP user name.
Security Level
Select the security level for the SNMP group. The available security levels are:
• NoAuth/NoPriv: No authentication no privacy.
• Auth/NoPriv: Authentication without privacy.
• Auth/Priv: Authentication and privacy.
Group Name
Select an SNMP group to which the user belongs.
• When the security level is NoAuth/NoPriv, you can select an SNMP group
with no authentication no privacy.
• When the security level is Auth/NoPriv, you can select an SNMP group with
no authentication no privacy or authentication without privacy.
• When the security level is Auth/Priv, you can select an SNMP group of any
security level.
Authentication Mode
Select an authentication mode (including MD5 and SHA) when the security
level is Auth/NoPriv or Auth/Priv.
Authentication Password Set the authentication password when the security level is Auth/NoPriv or
Auth/Priv.
The confirm authentication password must be the same with the authentication
password.
Confirm Authentication
Password
Privacy Mode
Select a privacy mode (including DES56, AES128, and 3DES) when the
security level is Auth/Priv.