H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 339)

326
Item Description
Enable Outbound
Restriction
Select the option to enable outbound traffic control, and select the control method.
Available control methods include:
• Only MAC-Known Unicasts—Allows only unicast frames with their destination MAC
addresses being authenticated to pass through.
• Only Broadcasts and MAC-Known Unicasts—Allows only broadcast and unicast
packets with their destination MAC addresses being authenticated to pass through.
• Only Broadcasts, Multicasts, and MAC-Known Unicasts—Allows only broadcast,
multicast, and known unicast packets with their destination MAC addresses being
authenticated to pass through.
Configuring secure MAC addresses
1. From the navigation tree, select Authentication > Port Security to enter the page as shown in Figure
309 .
2. In the Security Ports And Secure MAC Address List area, click Secure MAC Address List.
3. The secure MAC address configuration area displays the secure MAC addresses that have been
learned or configured.
Figure 313 Secure MAC address list
4. Click Add.
Figure 314 Secure MAC address configuration page
5. Configure secure MAC address entries as described in Table 92 .
6. Click Apply.