H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 389
376
Figure 369 PKI certificate retrieval page
4.
Configure the parameters as described in
.
5.
Click Apply.
Table 105 Configuration items
Item Description
Domain Name
Select the PKI domain for the certificate.
Certificate Type
Select the type of the certificate to be retrieved, which can be CA or local.
Enable Offline
Mode
Click this box to retrieve a certificate in offline mode (that is, by an out-of-band means like
FTP, disk, or email) and then import the certificate into the local PKI system.
The following configuration items are displayed if you click this box.
Get File From
Device
Specify the path and name of the certificate file.
•
If the certificate file is saved on the device, select Get File From Device and then specify
the path of the file on the device.
•
If the certificate file is saved on a local PC, select Get File From PC and. then specify
the path to the file and select the partition of the device for saving the file.
Get File From PC
Password
Enter the password for protecting the private key, which was specified when the
certificate was exported.
6.
After retrieving a certificate, you can click View Cert corresponding to the certificate from the PKI
certificates list to display the contents of the certificate.