beautypg.com

Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 454

background image

441

•

The power supply priority of IP telephones is higher than that of AP; therefore, the PSE supplies

power to IP telephones first when the PSE power is overloaded.

Figure 429 Network diagram

Configuration procedure

1.

Enable PoE on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2, and configure their power

supply priority as critical.

a.

Select PoE > PoE from the navigation tree.

b.

Click the Setup tab.

c.

On the page that appears, select ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2
from the chassis front panel, select Enable from the Power State list, select Critical from the

Power Priority list, and click Apply.

See also other documents in the category H3C Technologies Routers: