H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 58)

45
Figure 35 Save configuration confirmation
Common
1. Select Device > Configuration from the navigation tree.
2. Click the Save tab.
The page in
Figure 35 appears.
3. Click Save Current Settings.
Initializing the configuration
This operation will restore the system to factory defaults, delete the current configuration file, and reboot
the device.
To initialize the configuration
1. Select Device > Configuration from the navigation tree.
2. Click the Initialize tab.
The initialize confirmation page appears.
Figure 36 Initialize confirmation dialog box
3. Click Restore Factory-D to restore the system to factory defaults.