H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 19)

6
Switching from the switching engine to the access
controller engine
CAUTION:
Do not switch between the switching engine and access controller engine frequently during a short period
of time. Frequent switching might cause the number of Web connections to reach the limit. After the limit
is reached, a Web connection can be established only after a period that equals the Web connection idle
timeout elapses. To change the Web connection idle timeout, see the chapter "
Device basic information
configuration ." To log off online Web users, access the CLI and use the free web-users all command in
user view.
By default, the management IP address is configured for both the access controller engine and switching
engine. To log in to the access controller engine from the switching engine, click Wlan Engine on the web
interface of the switching engine and then enter the login settings.
Figure 5 Switch from the switching engine to the access controller engine