H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 117)

104
The Add SNMP Community page appears.
Figure 86 Create an SNMP Community
4. Configure SNMP community settings as described in Table 35 .
5. Click Apply.
Table 35 Configuration items
Item Description
Community Name Set the SNMP community name.
Access Right
Configure SNMP NMS access right
• Read only: The NMS can perform read-only operations to the MIB objects when it
uses this community name to access the agent,
• Read and write: The NMS can perform both read and write operations to the MIB
objects when it uses this community name to access the agent.
View
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
ACL
Associate the community with a basic ACL to allow or prohibit the access to the agent
from the NMS with the specified source IP address.
Configuring an SNMP group
1. Select Device > SNMP from the navigation tree.
2. Click the Group tab.
The Group tab page appears.