H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 253)

240
Figure 215 Create an IPv6 static route
3. Configure IPv4 static route information as described in Table 75 .
4. Click Apply.
Table 75 Configuration items
Item Description
Destination IP Address
Type the destination host or network IP address, in the X:X::X:X format. The 128-bit
destination IPv6 address is a hexadecimal address with eight parts separated by
colons (:). Each part is represented by a 4-digit hexadecimal integer.
Prefix Length Type the prefix length of the destination IPv6 address.
Preference
Set a preference value for the static route. The smaller the number, the higher the
preference.
For example, specifying the same preference for multiple static routes to the same
destination enables load sharing on the routes, while specifying different priorities
for them enables route backup.
Next Hop Type the next hop address, in the same format as the destination IP address.
Interface
Select the outgoing interface.
You can select any available Layer 3 interface, for example, a virtual interface, of
the device. If you select NULL 0, the destination IPv6 address is unreachable.