H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 17)

4
Item Description
Configure IPv6
link-local address
Auto Configure how the VLAN interface obtains an IPv6 link-local address.
• Auto—Specifies the device to automatically generate an link-local
address based on the link-local address prefix (FE80::/64) and
the link layer address of the interface.
• Manual—Allows you to specify an IPv6 address.
Manual
IPv6 address
Specify an IPv6 link-local address for the VLAN interface.
This option is configurable if manual is selected. The address prefix
must be FE80::/64.
Finishing configuration wizard
After finishing the management IP address configuration, click Next to enter the following page. The
page displays your configurations. Check your configurations. To modify the settings, click Back to go
back to the page. Click Finish to confirm your settings.
Figure 4 Configuration finishes