H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 228)

215
4. Click Apply.
Table 66 Configuration items
Item Description
IP Address Type an IP address for the static ARP entry.
MAC Address Type a MAC address for the static ARP entry.
Advanced
Options
VLAN ID Type a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
The VLAN ID must be the ID of the VLAN that has already been created, and the port
must belong to the VLAN. The corresponding VLAN interface must have been created.
Port
Removing ARP entries
1. Select Network > ARP Management from the navigation tree to enter the default ARP Table page
shown in Figure 189 .
2. Remove ARP entries:
{
To remove specific ARP entries, select target ARP entries, and click Del Selected.
{
To remove all static and dynamic ARP entries, click Delete Static and Dynamic.
{
To remove all static ARP entries, click Delete Static.
{
To remove all dynamic ARP entries, click Delete Dynamic.
Configuring gratuitous ARP
1. Select Network > ARP Management from the navigation tree.
2. Click the Gratuitous ARP tab to enter the page shown in Figure 191 .
Figure 191 Gratuitous ARP configuration page
3. Configure gratuitous ARP as described in Table 67 .
Table 67 Configuration items
Item Description
Disable gratuitous ARP packets
learning function Disable learning of ARP entries according to gratuitous ARP packets.
Enabled by default.