H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 326)

313
The RADIUS Server page appears.
2. Configure the authentication server:
a. Select the server type Authentication Server.
b. Type 10.1.1.1 as the IP address of the primary authentication server.
c. Type 1812 as the UDP port of the primary authentication server.
d. Select active as the primary server status.
e. Click Apply.
Figure 296 Configure the RADIUS authentication server
3. Configure the RADIUS accounting server.
a. Select the server type Accounting Server.
b. Type 10.1.1.2 as the IP address of the primary accounting server.
c. Type 1813 as the UDP port of the primary accounting server.
d. Select active as the primary server status.
e. Click Apply.
Figure 297 Configure the RADIUS accounting server