H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 293)

280
Item Description
HTTP
Enable HTTP service
Specifies whether to enable the HTTP service.
The HTTP service is enabled by default.
Port Number
Sets the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.
ACL
Associates the HTTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
HTTPS
Enable HTTPS
service Specifies whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Port Number
Sets the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.
ACL
Associates the HTTPS service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
PKI domain
Sets the PKI domain for the HTTPS service.
You can configure the available PKI domains by selecting Authentication >
PKI from the navigation tree at the left side of the interface.