beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 455

background image

442

Figure 430 Configuring the PoE ports supplying power to the IP telephones

2.

Enable PoE on GigabitEthernet 1/0/11 and configure the maximum power of the port as 9000
milliwatts.

a.

Click the Setup tab.

b.

On the page that appears, select port GigabitEthernet 1/0/11 from the chassis front panel,
select Enable from the Power State list, select the box before Power Max and enter 9000, and
click Apply.

See also other documents in the category H3C Technologies Routers: