H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 155)

142
Item Description
Voice VLAN port state
Select Enable or Disable from the list to enable or disable the voice VLAN
function on the port.
Voice VLAN ID Set the voice VLAN ID of a port when the voice VLAN port state is set to Enable.
Select Ports
Select the port on the chassis front panel.
You can select multiple ports to configure them in bulk. The numbers of the
selected ports will be displayed in the Ports selected for voice VLAN field.
IMPORTANT:
To set the voice VLAN assignment mode of a port to automatic, you must make
sure that the link type of the port is trunk or hybrid, and that the port does not
belong to the voice VLAN.
Adding OUI addresses to the OUI list
1. Select Network > Voice VLAN from the navigation tree.
2. Click the OUI Add tab to enter the page shown in Figure 126 .
Figure 126 Add OUI addresses to the OUI list
3. Add OUI addresses to the OUI list as described in Table 48 .
4. Click Apply.
Table 48 Configuration items
Item Description
OUI Address Set the source MAC address of voice traffic.
Mask Set the mask length of the source MAC address.
Description Set the description of the OUI address entry.