H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 451)

438
Figure 426 Port Setup tab
3. Configure the PoE ports as described in Table 132 .
4. Click Apply.
Table 132 Configuration items
Item Description
Select Port Click to select ports to be configured and they will be displayed in the Selected Ports area.
Power State
Enable or disable PoE on the selected ports.
• The system does not supply power to or reserve power for the PD connected to a PoE
port if the PoE port is not enabled with the PoE function.
• You are allowed to enable PoE for a PoE port if the PoE port will not result in PoE power
overload; otherwise, you are not allowed to enable PoE for the PoE port.
By default, PoE is disabled on a PoE port.
IMPORTANT:
PSE power overload: When the sum of the power consumption of all ports exceeds the
maximum power of PSE, the system considers the PSE is overloaded.
Power Max
Set the maximum power for the PoE port.
The maximum PoE port power is the maximum power that the PoE port can provide to the
connected PD. If the power required by the PD is larger than the maximum PoE port
power, the PoE port will not supply power to the PD.
By default, the maximum power of a PoE port is 30000 milliwatts.