Configuring switch b, Configuration guidelines – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 145

132

Figure 121 Assign GigabitEthernet 1/0/1 to VLAN 2 and to VLANs 6 through 50 as a tagged member

Configuring Switch B

Configure Switch B as you configure Switch A.

Configuration guidelines

When you configure VLAN, follow these guidelines:

•

VLAN 1 is the default VLAN, which can be neither created nor removed manually.

•

Some VLANs are reserved for some special purposes. You can neither create nor remove them
manually.

•

Dynamic VLANs cannot be removed on the page for removing VLANs.