Configuration guidelines – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 333
320
1.
Select Network > Diagnostic Tools in the navigation tree. The ping page appears.
2.
Type the destination IP address 10.0.0.1.
3.
Click Start to start the ping operation.
shows the ping operation summary.
Figure 308 Ping operation summary
Configuration guidelines
When you configure 802.1X, follow these guidelines:
•
802.1X configuration on a specific port can take effect only after both global 802.1X and 802.1X
on the specified port are enabled.
•
Do not change the global 802.1X default timers unless you have determined that the changes would
better the interaction process. In most cases, the default settings are sufficient.
•
802.1X is mutually exclusive with link aggregation configuration on a port.
•
If EAP relay mode is used, the username format configuration on the access device does not take
effect. The access device sends the authentication data from the client to the server without any
modification. For more information about username format configuration, see the chapter
•
If the default VLAN of a port is a voice VLAN, the 802.1X function cannot take effect on the port.